Otolift Modul-Air Smart
Otolift’s most advanced stairlift runs on a rail just 6 centimetres across — built from interchangeable modules that adapt to almost any staircase, wide, narrow or spiral.
In folded position it is a discreet piece of furniture. In motion it is close to silent.
Modul-Air Smart
6 cm
Rail diameter — the thinnest single rail in the world, against 8 cm for a traditional stairlift
8,000 kg
The load the modular rail withstood in Otolift's own strength testing
125 kg
Maximum load capacity, with the rail itself tested to 8,000 kg
Every staircase
Wide, narrow, curved or spiral — the modules adapt rather than the staircase
Unique rail system
Most stairlifts run on a rail around 8 cm across. The Modul-Air Smart runs on 6 cm. On a Singapore staircase where width is already tight, that difference is what keeps the stairs usable on foot for everyone else in the house.
Otolift's engineers designed the rail as a series of modules that fit together. That is how it can be adjusted quickly to almost any staircase — including mounting on the inside of a curve if you prefer.
The oblique coupling between modules means the chair moves up and down in one continuous motion rather than stepping through each joint.
Otolift load-tested the modular rail to 8,000 kg. Thin is not the same as flimsy.
Modul-Air Smart
ø 6 cm
Shown to scale
Traditional stairlift
ø 8 cm
Shown to scale
Reverse drive technology
On a tight turn, a conventional stairlift swings the user’s knees towards the wall or the bannister. The Modul-Air Smart can drive partially — or completely — in reverse through that section instead.
It sounds like a small thing. On a narrow staircase with a half landing, it is the difference between a comfortable ride and one where you brace yourself at the same corner every time.
Standard, not optional
These are not upgrades sold at the quotation stage. Every Modul-Air Smart arrives with them, and every unit is certified to EN 81-40 — the European safety standard for stairlifts.
At the top the seat rotates automatically towards the landing, so you step off onto flat floor rather than over the edge of a step.
The footrest folds up and down on its own. Nobody has to bend down to the bottom of the stairs to move it.
A live status display built into the armrest. Battery level and the condition of the lift are readable at a glance, without an app or a manual.
Two 12V 7Ah batteries keep the lift running during a power failure, so it can always bring the user back down.
The lift stops automatically when it detects something in its path — gentle, immediate, and tested at every service.
The belt is designed to be fastened and released with one hand — which matters if the other one is holding a stick or a cup of tea.
Space at the bottom
The most common objection we hear is that a rail will block the hallway or the doorway at the foot of the stairs. Otolift has two answers to that, and we work out which one suits your home at the assessment.
The rail stops short at the bottom, leaving the passage or door completely free.
The rail hangs on the first step rather than continuing to the floor, so it takes up even less space.
Seat, footrest and armrests fold flat against the rail, so the staircase stays easy to walk up on foot.
At a glance
01
No need to remove or alter the handrail to fit the lift.
02
Interchangeable rail modules adapted to your exact staircase.
03
60 mm across, so the stairs remain walkable alongside it.
04
Live status and battery level, built into the armrest.
05
Designed for comfort on a ride taken several times a day.
06
Turns towards the landing automatically for safe stepping off.
07
Folds itself. Nobody has to bend down at the bottom step.
08
Fixed to the treads, not drilled into your walls.
Using it
After installation our technician walks through all of it with you, calmly and in as much detail as you want.
Step 1
Bring the chair to you with the wireless remote control.
Step 2
Sit down on the seat and fasten the belt one-handed.
Step 3
The chair moves silently and smoothly up the rail.
Step 4
It continues to the top and stops automatically.
Step 5
The seat turns to the landing. Release the belt.
Step 6
Step off safely onto the flat floor.
Upholstery & paintwork
Choose the seat in fabric, leather or synthetic leather, then pick the rail finish. Tap a swatch to see it.
Colours on a screen are never exact. We bring the physical sample set to the free home assessment so you can hold them against your own staircase before choosing.
Straight staircases
A single unbroken run from bottom to top is the simplest configuration and the most affordable. The same 6 cm rail, the same standard features — just fewer modules.
The rail can stop short of the doorway at the foot of the stairs.
Wide side or narrow side, whichever keeps your doors and windows usable.
The common Singapore straight-flight layout is a straightforward fit.
Curved & spiral staircases
This is where the modular rail earns its reputation. Wide, narrow or spiral, the modules follow the curve rather than forcing the staircase to accommodate a bulkier twin rail.
We record the exact geometry of your staircase before anything is configured.
The chair can reverse through the corner so your knees stay clear of the wall and bannister.
If you prefer the lift on the inside of the curve, the modules can be arranged for it.
Specifications
Configuration varies with your staircase. Everything below is confirmed in writing with your quotation.
| Rail | Single modular rail, mounted on the stair treads |
|---|---|
| Rail diameter | 60 mm — the world’s thinnest single rail (a traditional stairlift rail is around 80 mm) |
| Rail construction | Interchangeable modules with angled couplings; load tested to 8,000 kg |
| Maximum load capacity | 125 kg |
| Batteries | 2 × 12V, 7Ah — the lift operates during a power failure |
| Noise level | Max 50 dBA |
| Operation | Hold-to-run joystick; wireless remote control to call the lift |
| Footrest | Automatic folding footrest |
| Seat | Ergonomic, auto-swivel; folding armrests; smart dashboard in the armrest |
| Drive | Reverse Drive Technology — the chair can drive partially or fully in reverse |
| Safety | Automatic obstacle detection; one-handed seat belt |
| Certification | EN 81-40 — the European safety standard for stairlifts |
| Staircase types | Straight, curved, with landings, and spiral — wide or narrow side |
| Bottom rail options | Short Start, or First Riser Start mounted on the first step |
| Upholstery | Fabric (3), leather (4) or synthetic leather (6) — 13 colours in total |
| Rail paintwork | Cream white RAL 9001 or Light brown RAL 8025 |
| Travel speed | [CLIENT: not published by Otolift — confirm if you want it listed] |
| Warranty | [CLIENT: confirm the term you offer in Singapore] |
Otolift’s modular system means rail parts are held in stock at the factory rather than manufactured to order, which shortens delivery compared with conventional made-to-measure curved rails.
Common questions
Send a photo of your staircase on WhatsApp and we’ll tell you straight away whether it suits.
Usually, yes. The Modul-Air Smart runs on a single 60 mm rail — the thinnest available — mounted to the stair treads rather than the wall, so the stairs stay walkable alongside it. We confirm the exact clearance at the free home visit before anything is ordered.
The maximum load capacity is 125 kg.
No. The rail fixes to the stair treads, not to the wall or the handrail, so your bannister stays exactly where it is.
On a tight turn the chair can drive partially — or completely — in reverse through that section, so your knees stay clear of the wall and the bannister instead of swinging towards them.
It does not have to. A Short Start rail stops short of the doorway at the foot of the stairs, and a First Riser Start mounts on the first step instead. We choose whichever keeps your hallway clear.
The lift runs on two 12V 7Ah batteries that charge at every stop, so it keeps working during a power cut and will still bring you back down.
Yes. There are 13 upholstery colours across fabric, leather and synthetic leather, and the rail is finished in either Cream white RAL 9001 or Light brown RAL 8025.
Our own Otolift-trained technicians. The team that measures your staircase fits the lift and returns for servicing — nothing is handed to a subcontractor.